![]() ![]() ![]() can be ON if logger is not confused by automated dataĬI-V USB to Remote Transceive address = default remote address of the radio microphone configuration in keyer must be set to EL (MK, MKII) or preamplifier bypassed (MK2R, MK2R+) for stock microphoneįor simultaneous USB and CI-V (REMOTE jack) CAT control keeping both band data for microHAM products, and spectrum screen replication in logger use these settings:ĬI-V Address = default CI-V address of the radio whenever possible, use USB D/LSB D instead USB/LSB for AFSK set CI-V baud rate to some particular baud rate, not Auto Due to its construction it is possible to plug it in upside-down. make sure DIN13 ACC plug is correctly inserted to the radio. if you have P3, CAT connection flow is microHAM interface - P3 (PC jack) - K3.īaud rate set to 38400 in all Router, P3 and K3 Use E980297 adapter supplied by Elecraft for K3S use DATA A mode for all audio keying based (AFSK) digital modes if constant level audio output is low, add amplifier between interface and radio. use separate 12V power supply if radio does not provides auxiliary 12V output.ĭo not use same 12V power supply for interface as for transceiver. turn OFF internal CW keyer in the radio Most important transceiver settings and notes related to proper operation with our products. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
December 2022
Categories |